Sorry - I was assuming the truck came with a 7-pin or 7-blade, in which case the trailer would still have all the feeds it needs, +2 unused circuits.
| Ford F150 .net http://www.fordf150.net/forums/ |
|
| towing adaptor http://www.fordf150.net/forums/viewtopic.php?f=6&t=38002 |
Page 1 of 1 |
| Author: | satellitemike [ Fri Oct 06, 2006 3:46 pm ] |
| Post subject: | towing adaptor |
I have an 06 screw with a 5.4, I cant seem to find a trailering adaptor, I have a trailer with a flat five connection, the last lead is for a reverse brake override. Any idea where to get an adaptor? |
|
| Author: | PAZTruk [ Fri Oct 06, 2006 3:56 pm ] |
| Post subject: | |
what trailer wiring do you have on your truck? I got the round 7 with a flat 4 adapter that comes on the truck with the tow package, not sure if I have seen an adapter with brake override to flat 5. I would change the trailer to the round 7 if your truck has it. On the round 7 the center pole is the backup lights which activates the reverse brake override on my trailer. |
|
| Author: | satellitemike [ Fri Oct 06, 2006 4:13 pm ] |
| Post subject: | |
I have the same with the trailer package. |
|
| Author: | jcecil [ Fri Oct 06, 2006 5:56 pm ] |
| Post subject: | |
i work at uhaul, they really dont make an adapter for that, as far as i know. reason is that you have to wire in the reverse wire for that five flat connector. can be easily installed. buy the five flat wiring, they sell it at uhaul. use blue scotch locks to splice into the four flat you already have and run a wire down from the reverse light to hook up that last one. u can eliminate the four flat if you want. since the reverse override is on the opposite end of the male connector. let me know if you need anymore info on it. |
|
| Author: | LTM163 [ Fri Oct 06, 2006 7:39 pm ] |
| Post subject: | |
Ive never even seen a flat 5. Ive seen lots of round 5's and round 7's. Interesting |
|
| Author: | jcecil [ Fri Oct 06, 2006 8:00 pm ] |
| Post subject: | |
here are all the connectors i know of 4 flat 4 round 5 flat 6 round 7 round 7 flat |
|
| Author: | satellitemike [ Sat Oct 07, 2006 9:18 am ] |
| Post subject: | |
thanks for the suggestions. |
|
| Author: | Steve83 [ Sat Oct 07, 2006 10:27 am ] |
| Post subject: | |
Cut that oddball connector off & install one that matches your truck. Be sure you wired each pin correctly, & just abandon the unused terminals for now. You can add wiring to the trailer for them later, if you want. |
|
| Author: | jcecil [ Sat Oct 07, 2006 5:03 pm ] |
| Post subject: | |
if the trailer has a five flat on it, it needs the five flat. what that brake override does is disengage the brakes on the trailer to allow you to backup. that fifth wire has to be wire to the reverse light in order for it go work. |
|
| Author: | Steve83 [ Sun Oct 08, 2006 7:39 am ] |
| Post subject: | |
Sorry - I was assuming the truck came with a 7-pin or 7-blade, in which case the trailer would still have all the feeds it needs, +2 unused circuits.
|
|
| Author: | AEdwards514 [ Thu Oct 19, 2006 10:03 am ] |
| Post subject: | |
I would cut the adaptor off the trailer to match the 7-way on the truck. Your Best bet it too go to a local trailer place that installed brake controller and wiring harnesses and ask them |
|
| Author: | iskybantilus [ Fri Oct 20, 2006 6:54 am ] |
| Post subject: | |
steve83 is right, modify the trailer not your truck. cut off the plug, by a 7 pin connecter, and wire those five wires to the appropriate plug. you will gain the ability of the 30amp charge line and brake controller line that way. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|