Joined: Thu Feb 12, 2009 9:17 am Posts: 172
My Photos My Truck Mods Location: Commerce, Michigan
yeah i finally got an answere from some one and they said a 4 inch lift should clear the 35s and well ill have 5 inches so.. i should be good and if not i will just go higher lol
I have a 1994 f150 had 3 inch body lift with 33's had plenty of clearance should be fine with 35's only problem might be mine rubbed on radius arm when wheel was turned all the way to the left
Joined: Thu Feb 12, 2009 9:17 am Posts: 172
My Photos My Truck Mods Location: Commerce, Michigan
awesome thank you finally some one with good info lol (not that the others were bad) but you have same style truck and know first hand.. im actually getting 33s just to be safe..
i forgot to tell you i hope you are getting suspension lift i had to take my body lift off the 300 6 really can't take body lift it will fit but lower radiator hose will rub on the smog pump pulley
Post subject: Re: Maybe some one in here can help me..
Posted: Tue Nov 10, 2009 9:06 pm
Regular Member
Joined: Thu Feb 12, 2009 9:17 am Posts: 172
My Photos My Truck Mods Location: Commerce, Michigan
ahh thats where you are wrong my friend... actually there is a body kit for the 300... i have one.. lol all you need to do is go to say Autozone and buy a universal (flex fit Hose that is much longer..) for the radiator.. and it goes right around the pump pulley not even close.. trust me i.. i had the hardest time with my darn kit.. (reading instructions help) ROFL but also i have about 2 inches of lift in the front none in the rear yet..
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum