Yep - less than this one:
. 
| Ford F150 .net http://www.fordf150.net/forums/ |
|
| Clutch Kit http://www.fordf150.net/forums/viewtopic.php?f=4&t=48615 |
Page 1 of 1 |
| Author: | mrphy42 [ Sat Sep 22, 2007 8:41 am ] |
| Post subject: | Clutch Kit |
My clutch plate burned out on my 95, 6 cyl, F-150. When I look at clutch kits, some sites are telling me 10 inches, other sites are saying 11. Anyone have any ideas? Also, anyone with advice on the best way to install a new clutch kit, I am open to advice. |
|
| Author: | Steve83 [ Sat Sep 22, 2007 10:40 am ] |
| Post subject: | |
The flywheel is drilled for 10" and 11", so either will work as long as you buy a cover that matches the clutch you buy. Click my black Bronco below & look in the Hydraulic Clutch Conversion album. It shows the NAPA PN for the right clutch kit. |
|
| Author: | mrphy42 [ Sat Sep 22, 2007 11:26 am ] |
| Post subject: | |
That will be a huge help. Now my next question for any one that can tell me is about when I push in the clutch itself. This is without having yet pulled any parts for inspection. When I push on the clutch, it slams to the floor and stays there, and I have to pull it back up. It acts almost like a toggle switch, only in the up or down position. Any ideas as to what could be causing this, and if a clutch kit alone would be the solution? |
|
| Author: | Steve83 [ Sun Sep 23, 2007 7:00 am ] |
| Post subject: | |
No fluid. The slave is blown out. |
|
| Author: | mrphy42 [ Mon Sep 24, 2007 3:37 pm ] |
| Post subject: | |
Here is one more question. Any idea how much one of these transmissions weighs? |
|
| Author: | Steve83 [ Tue Sep 25, 2007 7:29 am ] |
| Post subject: | |
Yep - less than this one: .
|
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|